Internal Coating for Aluminum tubes-Safety Data Sheet
2014-11-28
Internal Coating for Aluminum tubes-Safety Data Sheet
2014-11-28

Internal Coating for Aluminum tubes-Safety Data Sheet

SAFETY DATA SHEETSAFETY DATA SHEET
Date of issue/Date of revision
Version 1
15 January 2012
Section 1. Identification
Product code : BI6511-6/20K-C4
Product name : INTERNAL LINER FOR AL TUBE
Product name : INTERNAL LINER FOR AL TUBE
Product type
: Liquid.
Relevant identified uses of the substance or mixture and uses advised against
Identified uses
Coating. Paints. Painting-related materials.
Uses advised against
Not applicable.
Reason
Supplier's details : Foshan Bairun Chemical Co., Ltd
Baishi Industry Area,Genghe,Gaoming,Foshan, Guangdong, China
Zip:528522
Tel: (+86) 0757 8884 5668 Fax: (+86)0757-8884 5550
Emergency telephone
number (with hours of operation)
: 86 532 83889090
Section 2. Hazards identification
Classification of the substance or mixture
: FLAMMABLE LIQUIDS - Category 3
ACUTE TOXICITY: ORAL - Category 5
ACUTE TOXICITY: SKIN - Category 4
ACUTE TOXICITY: INHALATION - Category 4
SKIN CORROSION/IRRITATION - Category 2
SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2A SKIN SENSITIZATION - Category 1
TOXIC TO REPRODUCTION [Fertility] - Category 1B
TOXIC TO REPRODUCTION [Unborn child] - Category 1B AQUATIC TOXICITY (ACUTE) - Category 3
AQUATIC TOXICITY (CHRONIC) - Category 2
Percentage of the mixture consisting of ingredient(s) of unknown toxicity: 5.5% Percentage of the mixture consisting of ingredient(s) of unknown hazards to the
aquatic environment: 23.7%
GHS label elements
Hazard pictograms :
Signal word : Danger
China
Page: 1/12
Product code BI6511-6/20K-C4
Product name INTERNAL LINER FOR AL TUBE
Section 2. Hazards identification
Hazard statements : Flammable liquid and vapor. Harmful in contact with skin. Harmful if inhaled.
May be harmful if swallowed. Causes skin irritation.
Causes serious eye irritation.
Date of issue 15 January 2012 Version 1
Precautionary statements
May cause an allergic skin reaction.
May damage fertility or the unborn child. Toxic to aquatic life with long lasting effects.
Prevention : Obtain special instructions before use. Wear protective gloves. Wear eye or face protection. Wear protective clothing. Keep away from heat, sparks, open flames and hot surfaces. - No smoking. Use explosion-proof electrical, ventilating, lighting
and all material-handling equipment. Avoid release to the environment.
Response : IF INHALED: Remove victim to fresh air and keep at rest in a position comfortable
for breathing. IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water or shower.
Storage : Keep cool.
Disposal : Not applicable.
Other hazards which do not
result in classification
: Not available.
Section 3. Composition/information on ingredients
Substance/mixture
: Mixture
CAS number/other identifiers
CAS number : Not applicable.
EC number : Mixture.
Ingredient name
% CAS number
reaction product: bisphenol-A-(epichlorhydrin); epoxy resin 25 - <50 25068-38-6
2-methoxyethanol 15 - <20 109-86-4
N,N-dimethylacetamide 10 - <12.5 127-19-5
xylene 7 - <10 1330-20-7
proprietary epoxy resin 3 - <5 SUB122184
2-ethoxyethyl acetate 3 - <5 111-15-9
2-butoxyethanol 3 - <5 111-76-2
ethylbenzene 1 - <2 100-41-4
rosin 1 - <2 8050-09-7
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in this section.
Occupational exposure limits, if available, are listed in Section 8.
Note - SUB Code: CAS number is Not established
China
Page: 2/12
Product code BI6511-6/20K-C4
Product name INTERNAL LINER FOR AL TUBE
Section 4. First aid measures
Description of necessary first aid measures
Date of issue 15 January 2012 Version 1
Eye contact
Inhalation
Skin contact
: Check for and remove any contact lenses. Immediately flush eyes with running water for at least 15 minutes, keeping eyelids open. Seek immediate medical attention.
: Remove to fresh air. Keep person warm and at rest. If not breathing, if breathing is irregular or if respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel.
: Remove contaminated clothing and shoes. Wash skin thoroughly with soap and water or use recognized skin cleanser. Do NOT use solvents or thinners.
Ingestion :
If swallowed, seek medical advice immediately and show this container or label. Keep person warm and at rest. Do not induce vomiting.
Most important symptoms/effects, acute and delayed
Potential acute health effects
Eye contact
: Causes serious eye irritation.
Inhalation : Harmful if inhaled. Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposure.
Skin contact : Harmful in contact with skin. Causes skin irritation. May cause an allergic skin reaction.
Ingestion
: May be harmful if swallowed. Irritating to mouth, throat and stomach.
Over-exposure signs/symptoms
Eye contact : Adverse symptoms may include the following:
pain or irritation watering redness
Inhalation
Skin contact
Ingestion
: Adverse symptoms may include the following:
reduced fetal weight increase in fetal deaths skeletal malformations
: Adverse symptoms may include the following:
irritation redness
reduced fetal weight increase in fetal deaths skeletal malformations
: Adverse symptoms may include the following:
reduced fetal weight increase in fetal deaths skeletal malformations
Indication of immediate medical attention and special treatment needed, if necessary
Notes to physician : In case of inhalation of decomposition products in a fire, symptoms may be delayed. The exposed person may need to be kept under medical surveillance for 48 hours.
Specific treatments : No specific treatment.
Protection of first-aiders : No action shall be taken involving any personal risk or without suitable training. If it
is suspected that fumes are still present, the rescuer should wear an appropriate mask or self-contained breathing apparatus. It may be dangerous to the person providing aid to give mouth-to-mouth resuscitation. Wash contaminated clothing thoroughly with water before removing it, or wear gloves.
See toxicological information (Section 11)
China
Page: 3/12
Product code BI6511-6/20K-C4
Product name INTERNAL LINER FOR AL TUBE
Section 5. Fire-fighting measures
Extinguishing media
Date of issue 15 January 2012 Version 1
Suitable extinguishing media
Unsuitable extinguishing media
: Use dry chemical, CO2, water spray (fog) or foam.
: Do not use water jet.
Specific hazards arising
from the chemical
Hazardous thermal decomposition products
: Flammable liquid and vapor. In a fire or if heated, a pressure increase will occur and
the container may burst, with the risk of a subsequent explosion. Runoff to sewer may create fire or explosion hazard. This material is toxic to aquatic life with long lasting effects. Fire water contaminated with this material must be contained and prevented from being discharged to any waterway, sewer or drain.
: Decomposition products may include the following materials:
carbon dioxide carbon monoxide nitrogen oxides
halogenated compounds
Special protective actions
for fire-fighters
Special protective equipment for fire-fighters
: Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable training. Move containers from fire area if this can be done without risk. Use water spray to keep fire-exposed containers cool.
: Fire-fighters should wear appropriate protective equipment and self-contained breathing apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Section 6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
For non-emergency personnel
: No action shall be taken involving any personal risk or without suitable training. Evacuate surrounding areas. Keep unnecessary and unprotected personnel from entering. Do not touch or walk through spilled material. Shut off all ignition sources. No flares, smoking or flames in hazard area. Avoid breathing vapor or mist. Provide adequate ventilation. Wear appropriate respirator when ventilation is inadequate.
Put on appropriate personal protective equipment.
For emergency responders : If specialised clothing is required to deal with the spillage, take note of any information in Section 8 on suitable and unsuitable materials. See also the information in "For non-emergency personnel".
Environmental precautions
: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains
and sewers. Inform the relevant authorities if the product has caused environmental pollution (sewers, waterways, soil or air). Water polluting material. May be harmful
to the environment if released in large quantities. Collect spillage.
Methods and materials for containment and cleaning up
Small spill :
Large spill :
Stop leak if without risk. Move containers from spill area. Dilute with water and mop up if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry
material and place in an appropriate waste disposal container. Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor.
Stop leak if without risk. Move containers from spill area. Approach release from upwind. Prevent entry into sewers, water courses, basements or confined areas. Wash spillages into an effluent treatment plant or proceed as follows. Contain and
collect spillage with non-combustible, absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in container for disposal according to local
regulations (see section 13). Use spark-proof tools and explosion-proof equipment. Dispose of via a licensed waste disposal contractor. Contaminated absorbent material may pose the same hazard as the spilled product. Note: see section 1 for
China
Page: 4/12
Product code BI6511-6/20K-C4
Product name INTERNAL LINER FOR AL TUBE
Date of issue 15 January 2012 Version 1
Section 6. Accidental release measures
emergency contact information and section 13 for waste disposal.
Section 7. Handling and storage
Precautions for safe handling
Conditions for safe storage, including any incompatibilities
: Put on appropriate personal protective equipment (see Section 8). Eating, drinking
and smoking should be prohibited in areas where this material is handled, stored and processed. Workers should wash hands and face before eating, drinking and
smoking. Remove contaminated clothing and protective equipment before entering eating areas. Persons with a history of skin sensitization problems should not be employed in any process in which this product is used. Avoid exposure - obtain special instructions before use. Avoid exposure during pregnancy. Do not get in
eyes or on skin or clothing. Do not ingest. Avoid breathing vapor or mist. Avoid release to the environment. Refer to special instructions/safety data sheet. Use only with adequate ventilation. Wear appropriate respirator when ventilation is
inadequate. Do not enter storage areas and confined spaces unless adequately ventilated. Keep in the original container or an approved alternative made from a compatible material, kept tightly closed when not in use. Store and use away from heat, sparks, open flame or any other ignition source. Use explosion-proof electrical
(ventilating, lighting and material handling) equipment. Use non-sparking tools. Take precautionary measures against electrostatic discharges. To avoid fire or explosion, dissipate static electricity during transfer by grounding and bonding containers and equipment before transferring material. Empty containers retain product residue and can be hazardous. Do not reuse container.
: Store in accordance with local regulations. Store in a segregated and approved
area. Store in original container protected from direct sunlight in a dry, cool and well- ventilated area, away from incompatible materials (see section 10) and food and
drink. Store locked up. Eliminate all ignition sources. Separate from oxidizing materials. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to
avoid environmental contamination.
Section 8. Exposure controls/personal protection
Control parameters
Occupational exposure limits
Ingredient name Exposure limits
2-methoxyethanol GBZ-2 (China, 4/2007). Absorbed through skin.
PC-TWA: 15 mg/m³ 8 hour(s).
N,N-dimethylacetamide GBZ-2 (China, 4/2007). Absorbed through skin.
PC-TWA: 20 mg/m³, 0 times per shift,
8 hour(s).
GBZ-2 (China, 1/2002). Absorbed through
skin.
STEL: 40 mg/m³ 15 minute(s). xylene GBZ-2 (China, 4/2007).
PC-STEL: 100 mg/m³, 0 times per shift,
15 minute(s).
PC-TWA: 50 mg/m³, 0 times per shift,
8 hour(s).
2-ethoxyethyl acetate GBZ-2 (China, 4/2007). Absorbed through skin.
China
Page: 5/12
Product code BI6511-6/20K-C4
Product name INTERNAL LINER FOR AL TUBE
Date of issue 15 January 2012 Version 1
Section 8. Exposure controls/personal protection
PC-TWA: 30 mg/m³, 0 times per shift,
8 hour(s).
GBZ-2 (China, 1/2002). Absorbed through
skin.
STEL: 60 mg/m³ 15 minute(s).
2-butoxyethanol ACGIH TLV (United States, 2/2010).
TWA: 20 ppm, 0 times per shift, 8 hour(s). ethylbenzene GBZ-2 (China, 4/2007).
PC-STEL: 150 mg/m³, 0 times per shift,
15 minute(s).
PC-TWA: 100 mg/m³, 0 times per shift,
8 hour(s).
Recommended monitoring procedures
: If this product contains ingredients with exposure limits, personal, workplace atmosphere or biological monitoring may be required to determine the effectiveness
of the ventilation or other control measures and/or the necessity to use respiratory protective equipment.
Appropriate engineering
controls
Environmental exposure controls
: Use only with adequate ventilation. Use process enclosures, local exhaust
ventilation or other engineering controls to keep worker exposure to airborne contaminants below any recommended or statutory limits. The engineering controls also need to keep gas, vapor or dust concentrations below any lower explosive
limits. Use explosion-proof ventilation equipment.
: Emissions from ventilation or work process equipment should be checked to ensure they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers, filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels.
Individual protection measures
Hygiene measures :
Wash hands, forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Contaminated work clothing should not be allowed out of the workplace. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location.
Eye protection
Skin protection
Hand protection
Gloves
Body protection
: Chemical splash goggles.
: Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary.
: butyl rubber
: Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Other skin protection : Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product.
Respiratory protection :
Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. If workers are exposed to concentrations above the exposure limit, they must use appropriate, certified respirators. Use a properly fitted, air-purifying or air-fed
respirator complying with an approved standard if a risk assessment indicates this is necessary.
China
Page: 6/12
Product code BI6511-6/20K-C4
Product name INTERNAL LINER FOR AL TUBE
Date of issue 15 January 2012 Version 1
Section 9. Physical and chemical properties
Appearance
Physical state
: Liquid.
Boiling point : >37.78°C (>100°F)
Flash point
: Closed cup: 23°C (73.4°F)
Material supports combustion.
: Yes.
Relative density
: 0.99
Section 10. Stability and reactivity
Reactivity : No specific test data related to reactivity available for this product or its ingredients.
Chemical stability :
The product is stable.
Possibility of hazardous
reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid
: When exposed to high temperatures may produce hazardous decomposition
products.
Incompatible materials :
Keep away from the following materials to prevent strong exothermic reactions:
oxidizing agents, strong alkalis, strong acids.
Hazardous decomposition
products
: Decomposition products may include the following materials: carbon monoxide,
carbon dioxide, smoke, oxides of nitrogen.
Section 11. Toxicological information
Information on toxicological effects
Acute toxicity
Product/ingredient name Result Species Dose Exposure
reaction product: bisphenol- A-(epichlorhydrin); epoxy resin
LD50 Dermal Rabbit >2 g/kg -
LD50 Oral Rat >2 g/kg -
2-methoxyethanol LC50 Inhalation Vapor Rat >8200 mg/m3 4 hours LC50 Inhalation Vapor Rat 1984 ppm 4 hours LD50 Dermal Rabbit 1280 mg/kg -
LD50 Oral Rat 2370 mg/kg -
N,N-dimethylacetamide LC50 Inhalation Gas. Rat 2475 ppm 1 hours
LD50 Dermal Rabbit 2240 mg/kg - LD50 Oral Rat 4300 mg/kg -
xylene LC50 Inhalation Gas. Rat 6670 ppm 4 hours
LC50 Inhalation Vapor Rat 5000 ppm 4 hours
LD50 Dermal Rabbit >1.7 g/kg - LD50 Oral Rat 4.3 g/kg -
proprietary epoxy resin LD50 Oral Rat >2000 mg/kg -
2-ethoxyethyl acetate LC50 Inhalation Vapor Rat >10811 mg/m³ 4 hours
LC50 Inhalation Vapor Rat >2000 ppm 4 hours
LD50 Oral Rat 2700 mg/kg -
2-butoxyethanol LD50 Dermal Rabbit 220 mg/kg - LD50 Oral Rat 250 mg/kg -
China
Page: 7/12
Product code BI6511-6/20K-C4
Product name INTERNAL LINER FOR AL TUBE
Section 11. Toxicological information
Date of issue 15 January 2012 Version 1
ethylbenzene
LC50 Inhalation Vapor
Rat
4000 ppm
4 hours
LD50 Dermal
Rabbit
>5000 mg/kg
-
LD50 Oral
Rat
3.5 g/kg
-
rosin
LD50 Oral
Rat
7600 mg/kg
-
Irritation/Corrosion
Not available.
Sensitization
Not available.
Mutagenicity
Not available.
Carcinogenicity
Not available.
Reproductive toxicity
Not available.
Teratogenicity
Not available.
Specific target organ toxicity (single exposure)
Name Category
Route of exposure
Target organs
proprietary epoxy resin Category 3 Not determined Respiratory tract irritation
Specific target organ toxicity (repeated exposure)
Not available.
Aspiration hazard
Not available.
Information on the likely
routes of exposure
Potential acute health effects
: Not available.
Eye contact
: Causes serious eye irritation.
Inhalation : Harmful if inhaled. Exposure to decomposition products may cause a health hazard. Serious effects may be delayed following exposure.
Skin contact : Harmful in contact with skin. Causes skin irritation. May cause an allergic skin reaction.
Ingestion
: May be harmful if swallowed. Irritating to mouth, throat and stomach.
Symptoms related to the physical, chemical and toxicological characteristics
Eye contact : Adverse symptoms may include the following:
pain or irritation watering redness
Inhalation
: Adverse symptoms may include the following:
reduced fetal weight increase in fetal deaths skeletal malformations
China
Page: 8/12
Product code BI6511-6/20K-C4
Product name INTERNAL LINER FOR AL TUBE
Section 11. Toxicological information
Date of issue 15 January 2012 Version 1
Skin contact
Ingestion
: Adverse symptoms may include the following:
irritation redness
reduced fetal weight increase in fetal deaths skeletal malformations
: Adverse symptoms may include the following:
reduced fetal weight increase in fetal deaths skeletal malformations
Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate
effects
: Not available.
Potential delayed effects : Not available.
Long term exposure
Potential immediate effects
: Not available.
Potential delayed effects : Not available.
Potential chronic health effects
General :
Carcinogenicity :
Mutagenicity :
Teratogenicity :
Once sensitized, a severe allergic reaction may occur when subsequently exposed
to very low levels.
No known significant effects or critical hazards.
No known significant effects or critical hazards.
May damage the unborn child.
Developmental effects : No known significant effects or critical hazards.
Fertility effects : May damage fertility.
Numerical measures of toxicity
Acute toxicity estimates
Route ATE value
Oral 2009.2 mg/kg Dermal 1573.3 mg/kg Inhalation (gases) 6081.3 ppm Inhalation (vapors) 21.03 mg/l Inhalation (dusts and mists) 3.079 mg/l
Other information :
There are no data available on the preparation itself. The preparation has been assessed following the conventional method of the Dangerous Preparations Directive 1999/45/EC and classified for toxicological hazards accordingly. See sections 3 and 15 for details.
Exposure to component solvent vapor concentrations in excess of the stated occupational exposure limit may result in adverse health effects such as mucous membrane and respiratory system irritation and adverse effects on the kidneys, liver and central nervous system. Symptoms and signs include headache, dizziness, fatigue, muscular weakness, drowsiness and, in extreme cases, loss of consciousness.
Solvents may cause some of the above effects by absorption through the skin. Repeated or prolonged contact with the preparation may cause removal of natural fat from the skin, resulting in non-allergic contact dermatitis and absorption through the skin.
If splashed in the eyes, the liquid may cause irritation and reversible damage. Ingestion may cause nausea, diarrhea and vomiting.
China
Page: 9/12
Product code BI6511-6/20K-C4
Product name INTERNAL LINER FOR AL TUBE
Section 11. Toxicological information
Date of issue 15 January 2012 Version 1
This takes into account, where known, delayed and immediate effects and also chronic effects of components from short-term and long-term exposure by oral, inhalation and dermal routes of exposure and eye contact.
Contains reaction product: bisphenol-A-(epichlorhydrin); epoxy resin (number average molecular weight ≤ 700), proprietary epoxy resin, rosin. May produce an allergic reaction.
Section 12. Ecological information
Toxicity
Product/ingredient name
Result
Species
Exposure
2-methoxyethanol Acute LC50 >10000000 ug/L Fresh water
Fish - Lepomis macrochirus - 33
to 75 mm
96 hours
xylene Acute LC50 8500 ug/L Marine water Crustaceans - Palaemonetes pugio
48 hours
Acute LC50 3300 to 4093 ug/L Fresh water
Fish - Oncorhynchus mykiss -
0.6 g
96 hours
2-ethoxyethyl acetate Acute LC50 40000 ug/L Marine water Fish - Menidia beryllina - 40 to
100 mm
2-butoxyethanol Acute EC50 >1000 mg/L Fresh water Daphnia - Daphnia magna - <24
hours
96 hours
48 hours
Acute LC50 800000 to 1000000 ug/L Marine water
Crustaceans - Crangon crangon 48 hours
Acute LC50 1250000 ug/L Marine water Fish - Menidia beryllina - 40 to
100 mm
Chronic NOEC 1000 mg/L Fresh water Daphnia - Daphnia magna - <24
hours
ethylbenzene Acute EC50 4600 ug/L Fresh water Algae - Pseudokirchneriella subcapitata
Acute EC50 3600 ug/L Fresh water Algae - Pseudokirchneriella subcapitata
96 hours
48 hours
72 hours
96 hours
Acute EC50 2930 to 4400 ug/L Fresh water
Daphnia - Daphnia magna - Neonate - <=24 hours
48 hours
Acute LC50 >5200 ug/L Marine water Crustaceans - Americamysis bahia - <24 hours
48 hours
Acute LC50 4200 ug/L Fresh water Fish - Oncorhynchus mykiss 96 hours
Chronic NOEC 6800 ug/L Fresh water Daphnia - Daphnia magna -
<=24 hours
48 hours
Chronic NOEC 3300 ug/L Marine water Fish - Menidia menidia 96 hours
Persistence/degradability
Not available.
Bioaccumulative potential
Product/ingredient name
LogPow BCF Potential
2-methoxyethanol -0.503 - low
N,N-dimethylacetamide -0.77 - low
2-ethoxyethyl acetate 0.24 - low
2-butoxyethanol 0.83 - low ethylbenzene 3.1 - low
Mobility in soil
Soil/water partition coefficient (KOC)
: Not available.
China
Page: 10/12
Product code BI6511-6/20K-C4
Product name INTERNAL LINER FOR AL TUBE
Section 12. Ecological information
Date of issue 15 January 2012 Version 1
Other adverse effects : No known significant effects or critical hazards.
Section 13. Disposal considerations
Disposal methods
: The generation of waste should be avoided or minimized wherever possible. Significant quantities of waste product residues should not be disposed of via the foul sewer but processed in a suitable effluent treatment plant. Dispose of surplus and non-recyclable products via a licensed waste disposal contractor. Disposal of this product, solutions and any by-products should at all times comply with the requirements of environmental protection and waste disposal legislation and any regional local authority requirements. Waste packaging should be recycled.
Incineration or landfill should only be considered when recycling is not feasible. This material and its container must be disposed of in a safe way. Care should be taken when handling emptied containers that have not been cleaned or rinsed out. Empty containers or liners may retain some product residues. Vapor from product residues may create a highly flammable or explosive atmosphere inside the container. Do not cut, weld or grind used containers unless they have been cleaned thoroughly
internally. Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and sewers.
Section 14. Transport information
UN IMDG IATA
UN number
1263 1263
1263
UN proper
shipping name
Transport hazard class(es)
Packing group
PAINT
3
III
PAINT. Marine pollutant
(reaction product: bisphenol-A-
(epichlorhydrin); epoxy resin)
3
III
PAINT
3
III
Environmental hazards
Special precautions for user
Additional information
Yes. Yes. Yes.
Not available. Not available. Not available.
- - -
Section 15. Regulatory information
Safety, health and environmental regulations specific for the product
: No known specific national and/or regional regulations applicable to this product
(including its ingredients).
China inventory (IECSC) : All components are listed or exempted.
Australia inventory (AICS) : Not determined.
China
Page: 11/12
Product code BI6511-6/20K-C4
Product name INTERNAL LINER FOR AL TUBE
Section 15. Regulatory information
Date of issue 15 January 2012 Version 1
Canada inventory ( DSL ) : At least one component is not listed.
Europe inventory ( REACH ) : Please contact your supplier for information on the inventory status of this material.
Japan inventory (ENCS) : Not determined.
Korea inventory (KECI) : Not determined.
New Zealand ( NZIoC ) : Not determined.
Philippines inventory
(PICCS)
United States inventory
(TSCA 8b)
: Not determined.
: Not determined.
Section 16. Other information
History
Date of issue/Date of revision
: 15 January 2012
Date of previous issue :
No previous validation.
Version : 1
EHS
Key to abbreviations : ADN/ADNR = European Provisions concerning the International Carriage of
Dangerous Goods by Inland Waterway
ADR = The European Agreement concerning the International Carriage of
Dangerous Goods by Road ATE = Acute Toxicity Estimate BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL 73/78 = International Convention for the Prevention of Pollution From
Ships, 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
RID = The Regulations concerning the International Carriage of Dangerous Goods by Rail
UN = United Nations
Indicates information that has changed from previously issued version.
Notice to reader
The information contained in this data sheet is based on present scientific and technical knowledge. The purpose of this information is to draw attention to the health and safety aspects concerning the products supplied by PPG, and to recommend precautionary measures for the storage and handling of the products.
No warranty or guarantee is given in respect of the properties of the products. No liability can be accepted for any failure to observe the precautionary measures described in this data sheet or for any misuse of the products.


Copyright © 2018 Beauty Sky Packing (Shenzhen) Co., Ltd.All Rights Reserved.

Sitemap XML
chat now
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!
   

online service